AXIS P7701 Installation Guide Page 9
ENGLISH
Assign an IP address
Follow these instructions to assign an IP address or see page 13 for other methods of connecting the
AXIS P7701 to the Internet.
Assign an IP address
Most networks today have a DHCP server that automatically assigns IP addresses to connected
devices. If your network does not have a DHCP server the AXIS P7701 will use 192.168.0.90 as the
default IP address.
If you would like to assign a static IP address, the recommended method in Windows is either AXIS
IP Utility or AXIS Camera Management. Depending on the number of decoders you wish to install,
use the method that best suits your purpose.
Both of these free applications are available at www.axis.com/techsup
Notes:
• If assigning the IP address fails, check that there is no firewall blocking the operation.
• For other methods of assigning or discovering the IP address of the AXIS P7701, e.g. in other operating
systems, see page 13.
Method Recommended for Operating system
AXIS IP Utility
See page 10
Single camera
Small installations
Windows
AXIS Camera Management
See page 11
Multiple cameras
Large installations
Installation on a different subnet
Windows 2000
Windows XP Pro
Windows 2003 Server
Windows Vista
To Next Page
Loading...
