Axis P7701 - AXIS P7701 Video Decoder; Key features

AXIS P7701 Installation Guide Page 3
ENGLISH
AXIS P7701 Installation Guide
This installation guide provides instructions for installing the AXIS P7701 Video Decoder on your
network. For all other aspects of using the product, please see the User’s Manual, available at
www.axis.com/techsup
Installation steps
1. Check the package contents against the list below.
2. Hardware overview. See page 4.
3. Install the hardware. See page 8.
4. Assign an IP address. See page 9.
5. Set the password. See page 12.
Package contents
Item Models/variants/notes
Video decoder AXIS P7701 - Video Decoder
PS-T or PS-K indoor power
supply
(country specific)
Europe
UK
Australia
USA/Japan
Argentina
Korea
Terminal block connector 4-pin connector block for connecting external devices to the I/O terminal
connector
DC power in terminal connector
RS422/485 terminal connectors
Mounting kit Two tamper-proof screws
One sheet of 4 rubber feet
Two wall plugs
Printed Materials AXIS P7701 Installation Guide (this document)
Axis Warranty Document
Important!
This product must be used in
compliance with local laws and
regulations.