Page 6 AXIS P7701 Installation Guide
Note:
A video select switch is not included in the package with the AXIS P7701, and there is currently no
optional video switch available from Axis. However, it is possible for you to easily connect your own
switch. See the connection diagram below.
The following connection diagram gives an example of how to connect an auxiliary device to the
AXIS P7701.
Function Pin Notes Specifications
GND 1 Ground
3.3V DC
Power
2 Can be used to power auxiliary equipment.
Note: This pin can only
be used as power out.
Max. load = 250mA
Digital
Input
3 Input for a video select switch.
Unused 4 Unused
To Next Page
Loading...
