Note
Web browsers do not support H.265 decoding. Use a video management system or
application supporting H.265 decoding.
To record video you must first set up network storage, see Set up network storage, or have an
SD card installed.
You can create rules to make your device perform an action when certain events occur. A rule
Increase the compression.
Turn on dynamic FPS.
Set up network storage
To store recordings on the network, you need to set up your network storage.
1. Go to Settings > System > Storage.
2. Click Setup under Network storage.
3. Enter the IP address of the host server.
4. Enter the name of the shared location on the host server.
5. Move the switch if the share requires a login, and enter username and password.
6. Click Connect.
Record and watch video
Record video
1. Go to the live view.
2. To start a recording, click Record. Click again to stop the recording.
Watch video
1. Click Storage > Go to recordings.
2. Select your recording in the list and it will play automatically.
Set up rules and alerts
To Next Page
Loading...
