EasyManua.ls Logo

Axis Q1951-E - Product Buttons; Connectors; Network Connector; Audio Connector

Axis Q1951-E
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10/7/21, 12:22 PM
AXIS Q1951-E Thermal Camera User manual
https://help.axis.com/axis-q1951-e
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C
LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC
in the United States, other countries or both.
RJ45 Ethernet connector with Power over Ethernet (PoE).
when inserting or removing the SD card. Use your fingers to insert and remove the
card.
Risk of data loss and corrupted recordings. Do not remove the SD card while the
product is running. Unmount the SD card from the product’s webpage before
removal.
Buttons
Control button
The control button is used for:
Resetting the product to factory default settings. See Reset to factory default settings.
Connecting to a one-click cloud connection (O3C) service over the internet. To connect,
press and hold the button for about 3 seconds until the status LED flashes green.
Connectors
Network connector
Audio connector
Audio in 3.5 mm input for a digital microphone, an analog mono microphone, or a line-
in mono signal (left channel is used from a stereo signal)
AXIS Q1951-E Thermal Camera
󰍜

Related product manuals