Axis T8504-E - Page 6

AXIST8504–EOutdoorPoESwitch
Generalinformation
HTTPisaweb-basedfriendlycongurationinterface.
HTTPS-TLSisasecuredweb-basedfriendlycongurationinterface.
•SNMPviaanSNMPmanagerapplication–tomonitortheunitoverthenetwork(MIB-IIRFC1213)andtomonitoror
conguretheunitPoEcapabilities(RFC3621)
SNMPv2cfornon-securedSNMPmanagement
SNMPv3forsecuredandencryptedmanagement
RFC1213MIB-IIfornetworkstatistics
RFC3621forPoESNMPMIBs
PrivateMIBextensionforRFC3621PoEMIB
VariousinfrastructureandnetworkMIBssuchasIP-MIB,TCP-MIB,UDP-MIBetc.
•SSHviaanSSHclient–toviewtheunitPoEpowerreport,networkstatus,unitcongurationandproductioninformation;
toupdatesoftware,enableordisablePoEfunctionalityandtopingremotenetworkdevicesforconnectivitytests
Remoteuserauthentication
Useraccesscanbemanagedinthefollowingways:
•Local–Usernameandpasswordismanagedlocallybythedevice
•RADIUS–UsernameandpasswordisauthenticatedbyRADIUSserveroverthenetwork
•TACACS+–UsernameandpasswordisauthenticatedbyTACACS+serveroverthenetwork
Security
WebHTTPandHTTPS,SNMPv2,SNMPv3andSSH,usedforaccessingtheunit,offerdifferentlevelsofsecuritystrength.AlsoRADIUS
andTACACS+,usedforremoteuserauthentication,offerdifferentsecuritylevels.
SNMPv1andSNMPv2usecommunitystringforGet/Set/Trapauthentication.SNMPv1andSNMPv2areconsideredasunsecured
protocolsincethecommunitystringpasswordcaneasilybeinterceptedbyanynetworksnifngdevice.
SNMPv3resolvesSNMPv1/v2securityissuesbyaddingauthenticationandencryptionlayerontopofSNMPpackets.
DefaultunitIP,usernameandpassword
Theunitisshippedwiththefollowingfactorydefaultusernamesandpasswords:
UnitdefaultIPv4address
IP=192.168.0.254
Mask=255.255.255.0
WebHTTP/HTTPSandSSH
Username=root
Password=pass
SNMPv2
GETcommunitystring=public
SETcommunitystring=write
Readcommunity=public
Writecommunity=write
Trapcommunity=public
SNMPv3
Username=admin
6