AWVSWL1200D
Woodturning Lathe
Axminster Tool Centre,
Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH
www.axminster.co.uk
This is a very capable machine aimed at the more experienced woodturner, offering
a high capacity of 1200mm(47") between centres and 450mm(18") diameter over
the bed. The motor is an inverter controlled, DC permanent magnet unit of 1.5kW
(2hp), combined with the 2 speed belt drive gives very high torque at the low
speeds plus a high speed of 3200rpm for smaller work, or finishing. All the controls
are grouped together on the front face of the headstock for convenience, along
with a digital read-out of the spindle speed. The spindle direction is easily reversed
with a simple toggle switch. Other features include the positioning of the headstock
anywhere along the bed, a spindle indexing facility at 10 degree intervals, camlock
action toolrest banjo and tailstock and a lock-off NVR switch. Supplied with
150mm(6") faceplate, Axminster 2MT drive centre, Axminster 2MT live tailstock
centre, indexing pins, 350mm(14") tool
rest and centre
knock-out bar.
Code: 502517
To Next Page
Need help?
General
