Axminster CQ6230A-2/910 User Manual

Axminster Tool Centre,
Unit 10 Weycroft Avenue, Axminster, Devon EX13 5PH
www.axminster.co.uk
CQ6230A-2/910 Metal
Turning Lathe
A high specification, floor standing, heavy duty metal
turning lathe suitable for the keen model engineer, general
maintenance and small production facilities.
Featuring a high tensile cast iron, precision ground, induction hardened bed
for long term accuracy. A fully gear driven spindle runs on precision taper roller
bearings, with hardened and ground gears giving a speed range of 65 - 1,810rpm,
selectable via the headstock mounted levers and a choice of two motor drive belt
speeds. The spindle has the popular D1-4 quick lock chuck mounting, ensuring a
wide range of accessories can be fitted.
Code: 953449

Axminster CQ6230A-2/910 Specifications

General

Swing Over Bed	300 mm
Distance Between Centres	910 mm
Spindle Bore	38 mm
Tailstock Taper	MT3
Spindle Speed	50 - 2, 000 rpm

Summary

LIMITED WARRANTY

PASSPORT DATA

GEOMETRIC ACCURACY CHECKING

Checks horizontal alignment of lathe guide ways using a level.

TEST PROTOCOL

GENERAL DESCRIPTION OF THE MACHINE

GENERAL DATA

Lists main assemblies and control components of the machine.

DESCRIPTION OF THE MAIN UNITS

FEED BOX

Describes the feed box and its adjustment mechanisms for feed and thread pitches.

CARRIAGE GROUP AND ITS MECHANISMS

Explains the components of the carriage group for fixing and driving cutting tools.

MACHINE INSTALLATION

TRANSPORTATION

Covers methods and precautions for transporting the machine.

UNPACKING

Provides steps for carefully unpacking and checking the machine and accessories.

HANDLING

Offers guidance on safely handling the unpacked machine to avoid damage.

PREPARATION

MOUNTING, FOUNDATIONS AND LEVELLING

Explains how to mount, prepare foundations, and level the machine for accurate operation.

CONNECTION TO THE EL. SUPPLY SOURCE

Guides on checking electrical supply and ensuring proper grounding.

PUTTING INTO OPERATION

Outlines the initial steps for starting and operating the lathe.

MACHINE SERVICE

LUBRICATION

Explains the importance and methods of lubricating machine parts.

MACHINE OPERATION

PUTTING INTO OPERATION

Details the procedure for starting and operating the lathe after initial setup.

CUTTING OF THREADS AND FEEDS

Explains how to set up and perform thread cutting and feed operations.

SAFETY

MACHINE CARE AND MAITENANCE

PARTS DRAWING & PARTS LIST

BED ASSEMBLY

HEAD STOCK

GEAR BOX

Diagram and list of parts for the main gear box assembly.

COMPOUND REST

SADDLE

TAIL STOCK

Diagram and list of parts for the tail stock assembly.