Need help?Do you have a question about the Axminster AW305WL and is the answer not in the manual?
Details the machine's compliance with EU directives and safety requirements.
Essential safety guidelines specifically for operating woodturning lathes safely.
Instructions on how to fit the indexing lock to the lathe.
Guide for installing the drive centre and faceplate onto the lathe spindle.
Steps for correctly mounting the tool holder onto the lathe.
Procedure for attaching the tailstock handle to the lathe.
Steps for correctly connecting the motor and power cables to the lathe.
Identifies and labels all major components of the woodturning lathe.
How to use the indexing facility for precise positioning of the workpiece.
Step-by-step guide on how to adjust the lathe's speed settings.
Procedure for safely removing the faceplate from the lathe spindle.
Chart indicating speed settings based on pulley and motor positions.
Method for detaching the drive and live centres from the lathe.
Essential cleaning and lubrication tasks to perform after each use.
Recommended monthly checks for belt tension, pulleys, and air vents.
General| Model | AW305WL |
|---|---|
| Type | Wood Lathe |
| Swing Over Bed | 305 mm |
| Distance Between Centres | 510 mm |
| Motor Power | 550 W |
| Spindle Bore | 10 mm |
| Spindle Nose | M33 x 3.5 |
| Tailstock Quill | 50 mm |
To Next Page
