Axminster WorkShop AW1950B - Page 20

ILLUSTRATION AND PARTS DESCRIPTION
20
Upper blade guide assembly for AW2305B and AW2606B Bandsaw
Rear thrust bearing and clamping cap head bolt (A) Fore and aft clamping cap head bolt (B)
Upper blade guide assembly for AW1950B Bandsaw
Rear thrust bearing and clamping cap head bolt (C) Fore and aft clamping cap head bolt (D)
Drive assembly for AW2305B and AW2606B Bandsaw
Drive pulley (E) and Tensioning idler wheel (F)
Drive assembly for AW1950B Bandsaw
Two speed drive pulley (G)
A
B
D
C
F
E
G