Axon Fleet 2 Installation Manual
Axon Enterprise, Inc. Page 5 of 39
Introduction
The Axon Fleet 2 solution is a camera system incorporating an audio and video recording
device with a vehicular windshield mount. This camera is designed for use in tough
environmental conditions encountered in law enforcement, corrections, military, and
security activities. The Axon Fleet 2 cameras are designed to record events for secure
storage, retrieval, and analysis via Evidence.com services. The recorded events can be
transferred wirelessly to the Evidence.com website using LTE and Wi-Fi technology.
Axon Fleet 2 is a video solution that connects police vehicles to an intelligent, cloud-based
evidence ecosystem. Axon Fleet 2 allows agencies to access and analyze in-car video. The
cameras are mounted in the car, where they can be activated using Axon Signal technology,
through the in-car computer using the Axon View XL application, or manually with the on-
camera button. The cameras then communicate with the Axon View XL application and can
offload video wirelessly through LTE or Wi-Fi technology to the Evidence.com website.
The Axon Fleet 2 system consists of the Axon Fleet cameras, the Axon Fleet camera mounts,
the Axon Fleet rear camera controller, and the Axon Fleet power unit. The Axon Fleet power
unit is an inline power supply for the cameras. During normal operation, the camera is
powered by the vehicle; however, if the ignition is shut off and a camera is still recording, the
associated Axon Fleet power unit is designed to supply the camera with enough energy to
continue recording for approximately 4 hours.
Axon Fleet 2 front camera with mount and an Axon Fleet power unit
Axon Fleet 2 rear camera controller, rear camera, and Axon Fleet power unit
To Next Page
Loading...
Need help?
General
