Axon MICRELEC CS2600-BT - Return Default Parameters; CS2600-BT Return Default Parameters

92
8 Return default parameters
8-1 CS2600-BT return default parameters
Some parameters of handheld unit return to default setting
WARNING: If you wish to return all parameters of the handheld unit, to default setting, please scan
the barcode above.
Some parameters of cradle return default value initialization
WARNING: If you wish to return all parameters of the cradle, please scan the barcode above.
Turn off handheld unit
If you wish to turn off the handheld unit, please scan the barcode above. If you want to turn on the
handheld unit again, please keep the trigger key being pressing for 2 seconds.
If you want to turn off the handheld unit via trigger key, please press and hold the trigger key, after the
laser beam turns off, wait for another 5 seconds, the handheld unit will be turned off, then you can
release the trigger key at this moment.