EasyManua.ls Logo

Axxera AXD530 - Bluetooth Operation; Pairing a Bluetooth Device; Connecting a Previously Paired Device; Disconnecting a Bluetooth Device

Axxera AXD530
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
AXD530
Bluetooth Operation
BeforeyoucanuseaBluetoothdevice,itmustbepairedand
connected.MakesurethatBluetoothisactivatedonyour
devicebeforeyoubeginthepairingprocess.
TheAXD530broadcaststhepairingsignalconstantly
whennodevicesarecurrentlyconnected.Completethe
pairingsequencefromyourBluetoothdevice.Refertothe
owner'smanualforyourdeviceformoredetails.
The device name is "DUAL BT"
The Bluetooth passcode "1234"
Note:TheAXD530canbeinanymodeofoperation
whenpairingisperformed.
Ifadeviceiscurrentlyconnected,pressandhold
to
disconnectthecurrentdevicebeforeanewdevicecan
bepaired.Thenbeginthepairingsequencefromthenew
Bluetoothdevice.
Preparation
Pairing a New Device
Pairing Additional
Devices
MostBluetoothdevicessupporttheauto-connectfeature,andwillconnectautomatically
ifthedeviceisinrangewhentheAXD530ispowered-on.Ifyourdevicewaspreviously
pairedbutdoesnotconnect,usetheseinstructionsbelow.
•IfyourmostrecentlyconnectedBluetoothdevicebecomesdisconnectedordoesnot
reconnect,press
fromBluetoothmodetoreconnectyourmobiledevice.
•Toconnectapreviouslypaireddevicethatwasnotrecentlyconnected:
1)Ifapplicable,pressandhold
todisconnectanyconnectedmobiledevices.
2)FromBluetoothmode,pressSELECT."PairedDevices"willappearontheLCD.
3)Turnthevolumeknobtocyclethroughthelistofdevices.
4)PressSELECT or
toconnecttothedesireddevice.Itmustbeinrangetoconnect.
Note:IftheAutoConnectsetupmenusettingissettoOFF,youmustpress
to
connectyoudeviceafterpairing,andeachtimetheAXD530ispowered-on.
Connecting a Paired Device
Disconnecting a Device
Pressandholdfor3secondstodisconnectaconnecteddevice.Thedevicewillremain
pairedandappearinthePAIREDDEVICESmenubutwillnotbeconnected.
Pairing a Device

Related product manuals