Axxera AXD530 - Troubleshooting Guide; Unit Not Turning On or No Sound; Unit Blowing Fuses or Excessive Skipping; Display Errors and Disc Acceptance

23
AXD530
Problem Cause Action
Unit will not turn on
(no power)
Yellowwirenotconnectedorincorrect
voltageRedwirenotconnectedor
incorrectvoltage
Checkconnectionsforproper
voltage(11-16VDC)
Blackwirenotconnected Checkconnectiontoground
Fuseblown Replacefuse
Unit has power
(but no sound)
Speakerwiresnotconnected Checkconnectionsatspeakers
Oneormorespeakerwirestouching
eachotherortouchingchassisground
Insulateallbarespeakerwires
fromeachotherandchassis
ground
Unit blows fuses
Yelloworredwiretouchingchassis
ground
Checkforpinchedwire
Speakerwirestouchingchassisground Checkforpinchedwire
Incorrectfuserating Usefusewithcorrectrating
Excessive skipping
Unitisnotmountedcorrectlyor
backstrapisnotsecure
Checkmountingsleeveand
backstrapsupport
Physicaldefectinmedia(CD,CD-Ror
CD-RW)
Checkmediaforscratches
NO FILE appears
on display
Disc read error PressejectorRESET
Focuserrorordiscisupsidedown PressejectorRESET
WMAfileisprotectedbyDRM(Digital
RightsManagement)
WritediscusingWMAfiles
thatarenotprotected
NoplayableMP3/WMAfilesfoundon
thedevice
Checkthedeviceforvalid
MP3/WMAfiles
Communication error
Removeandreconnectthe
device
Unit will not accept
a disc
CDmechanismpositionoutof
alignment
Press EJECT to reset CD
mechanismposition
CDtransitscrewsstillinplace
 Remove2transitscrews
locatedontopoftheunit
NO SUPPORT
appears on display
AninvalidID3tagversionispresent
Version1.0to2.4ID3tagsare
supported.
Troubleshooting