Axxess CHT0-01 - Page 4

Installation instructions for CHTO-01
METRA. The World’s best kits.
™
• Withallconnectionscompletedtotheaftermarketradio,plugthe22-pinharnessintothevehicles
wiringharness.
• Reconnectthenegativebatteryterminal.
• Cyclethekey,byturningtheignitiononfor30seconds.Thenoffandonagaintotesttheradio.
Installing the CHTO-01
• Turntheignitiononifnotalready,andthenturntheradioontoverifythattheradioworks.Check
balanceandfadercontrolsforproperoperation.
For amplified models only:
• Toadjusttheoverallvolumeofyouraudiosystemrotatethepotentiometer,whichislocatedonthe
16-pinsideoftheinterfaceclockwise.
Testing the CHTO-01
Our installation parts and kits make aftermarket stereo and video installation a breeze.