To start cooking
1. Touch the ON/OFF control for three seconds.
After power on, the buzzer beeps once, all displays
show “ – “ or “ – – “, indicating that the induction
hob has entered the state of standby mode.
2. Place a suitable pan on the cooking zone that
you wish to use.
• Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3. Touching the heating zone selection control，and a
indicator next to the key will flash
4. Select a heat setting by touching the or
control.
• If you don‟t choose a heat setting within 1
minute, the Induction hob will automatically
switch off. You will need to start again at
step 1.
• You can modify the heat setting at any time
during cooking.
Using your Induction Hob
To Next Page
Loading...
