The induction hob
or a cooking zone
has turned itself off
unexpectedly, a
tone sounds and an
error code is
displayed
(typically alternating
with one or two
digits in the cooking
timer display).
Please note down the error
letters and numbers, switch
the power to the induction hob
off at the wall, and contact a
qualified technician.
If an abnormality comes up, the induction hob will enter the protective state automatically
and display corresponding protective codes:
Temperature sensor failure
Please contact the supplier.
Temperature sensor of the IGBT
failure.
Please contact the supplier.
Please inspect whether power
supply is normal.
Power on after the power
supply is normal.
Bad induction hob heat
radiation
Please restart after the
induction hob cools down.
The above are the judgment and inspection of common failures.
Please do not disassemble the unit by yourself to avoid any dangers and damages to the
induction hob.
Failure Display and Inspection
To Next Page
Loading...
