Ayce DF-AT0900F - Remove Packaging; Unpacking and Inspection; Packaging for Storage; Identification of Parts

5958
Please unpack the components and check that no damage occurred
during transportation carefully. If any damage is apparent or any
component is missing, please contact the dealer immediately.
Save the packaging to store the Fan while it is not being used.
Remove Packaging:
Keep the original box! It can be used for storage in winter season.
• Thisappliancemustbeplacedonaatandsmoothareaandthe
power cord must not pass close to heating appliances.
• Alwaysconnectthisappliancetoa220-240Vmainspoweroutlet.
• Fordomesticindooruseonly.
• Neverdiptheapplianceintowateroranyotherliquid.
• Unplugordisconnecttheappliancefromthemainspowersupply
when not in use or before cleaning it.
• Storetheapplianceinaclean,drylocationifyoudonotplantouse
it for a long period.
• Ifthesupplycordisdamaged,itmustbereplacedbythe
manufacturer,itsserviceagentorsimilarlyqualiedpersonsin
order to avoid a hazard.
• Neveruseadamagedcordorplug.
• Onlyqualiedservicerepresentativesshouldperformrepairing
and maintenance services.
IDENTIFICATION OF PARTS
INSTALLATION
Installation accessories
Base
Remote Control
1 Handle 7 Front base
2 Top Cover 8 Upper back housing
3 LED display light belt 9 Back decorative panel
4 Former decorative pane 10 Down back housing
5 Down front housing 11 Rear base
6 Oscillation base 12 Upperltercover