Ayce DF-AT0900F - Mode Settings; Wind Mode Selection; Working Rule of Wind Modes; ECO Mode Function

6362
MODE
Working rule of wind modes:
1. Normal
Theinitialwindmodeis“Normal”,pressbuttontosetwindmode
andshiftastheruleof“Normal”-“Natural”-“Sleeping”-”ECO”-
Normal…TheLEDlightsshowaccordingly.(NodisplayforNORMAL
mode.)
LOW speed MED speed HI speed
2. Natural
Oscillogramfor3naturalwind(HI,MED,LOW)
3. Sleeping
(a)HI:30minutes“HI”naturalwind—30minutes”MED”naturalwind—Remain
“LOW”naturalwindspeed.
(b)MED:30minutes“MED”naturalwind—Remain“LOW”naturalwindspeed.
(b)LOW:Remain“LOW”naturalwindspeed.
4. ECO
Under this mode, the machine works in Low speed when ambience
temperature
＜
25
℃
; in Hi speed when
>
29V; in Med speed when 25°C~29°C.
Memory function without power off., which can memory the working status
beforeturnoff(notforpoweroff),expecttimer&modefunction.
The LED lights will dim 30% automatically without operation more
than 1 minute.
AUTO DIMMING FUCTION:
1.Double8digitaldisplay15*14mm,0.36inchCommonCathode.
2. Ten LED lights as below, except the digital display.
DISPLAY INSTRUCTION:
ON/OFF
MED
Low
Hi
Timer
Digital Display ECO
Temperature
RC Receiver
Sleeping
Natural
Swing