To Next PageTo Next Page
Need help?Do you have a question about the Ayra ComPar 2 and is the answer not in the manual?
Lighting Specifications| wide projection angle | 105 degrees |
|---|---|
| red light output | 21 lux @ 1m |
| green light output | 56 lux @ 1m |
| blue light output | 60 lux @ 1m |
| full light output | 137 lux @ 1m |
Power| connection voltage | 100-240V AC, 50/60 Hz |
|---|---|
| power consumption | 11.5 W max. |
| power factor | 0.566 |
| max. power output load | 9 A |
Operating Environment| ta | 0-40º Celsius |
|---|---|
| exterior surface temperature during normal use | 34.5º Celsius |
Covers general warnings, transport damage assessment, service, and light source limitations.
Details intended use, environments, storage, transport, and housing inspection.
Information on fuse replacement and critical warnings about battery handling and ingestion.
Explains WEEE disposal, CE mark compliance, and indoor use restrictions.
Lists all items included in the product packaging and accessories.
Instructions for inspecting the unit and initial setup guidance.
Identifies and labels the main physical components of the fixture and remote.
Details the functions of each button on the IR remote control.
Guides users on power connection, DMX address, and channel mode selection.
Covers master/slave, stand-alone modes, sound activation, sensitivity, and display functions.
Details fixture test mode, hour tracking, firmware version, and reset procedure.
Explains Auto, Sound, and Master/Slave operating modes.
Covers DMX connection, terminators, and available channel modes (2CH, 3CH1).
Details functions and values for DMX 3CH2 and 6CH modes.
Instructions for standing/suspended installation, light source details, and cooling.
Information on spare parts, repair, and fixture cleaning instructions.
Covers pre-use inspection, checks, transport, and storage guidelines.
Details power output, input/output connectors, and wiring schematics.
Instructions for using the remote control and its battery.
Solutions for fixture not powering on, DMX signal, and sound mode problems.
Solutions for low beam output and DMX signal instability or flickering.
Solutions for DMX signal degradation and incomplete channel response.
Solutions for inability to switch modes or remote control malfunctions.
Lists key technical details, features, and summarizes operating modes.
Provides electrical data, light output measurements, and lists included accessories.
Visuals and explanations for DMX connectors and electrical wiring.
