Refer to your notes describing which source components are
connected to which numbered input.
Use the left-hand knob to scroll to the desired numbered input
(”
Set1 Unused” through “Set8 Unused”).
Press the right-hand button to navigate to the next menu level.
The front panel will display “
Name Unused”.
Use the right-hand knob to scroll through the list of available
names (shown at the left). Selecting “
Unused” disables that
input, while selecting any other name from the list will activate
that input. Select a name that describes the component
connected to the chosen input.
When the desired name has been selected, press the left-hand
button to navigate to the previous menu level. The front panel
will show that the selected name has been assigned to the
chosen input.
8
Unused
CD
Phono
DVD
SACD
SSP
Digital
Tuner
Aux
Tape
D/A
CD-R
DAT
Sat
Cable
Video
TV
VCR
LD
PX-R
CX-R
DX-R
P-5xe
C-5xeMP
DX-5
CX-7eMP
QB-9
D-1xe
Input x
Custom x
To Next Page
Loading...
