-23-
I :
Play the next item
/ : Play the previous/ next item
EXIT :
Exit playing state and return to file list menu
A-5: Download Software/Database
1) Press / key to switch to “Software” file list of the current folder
2) Press OK key to open and download the selected file
USB PVR:
If the event timer record status is YES, the
channel will be recorded in PIP mode .Use
USB devices such as USB memory stick,
or USB interface hard-disk drive (HDD)
with this receiver, the start time is coming,
For example, A is currently view, B set to
recording, you will be meet two situation
1)A and B are same channels, the view will be play/record at the same time.
2) A and B under same TP, the view will be play A channel, and recording B at
same time.
In any way you set record as what is said above, Watching one channel and
recording another channel you can switch the channel
4.6 Ethernet Setting
Enter this view, you can set some net
parameter. press the Green key, start auto
search IP, the receiver will reboot. Press
Blue key, change the net port, and press
Red key can set IP by hand
To Next Page
Loading...
