Azbox Newgen+ - Remote Control Unit Operation

-7-
2.3 Remote Control Unit(RCU)
You can control this receiver by this remote controller with full function.
1. POWER: Switch the receiver on or off.
2.TV/R: Switch between TV and RADIO.
3. MUTE: Turn the sound On/Off.
4. NUMERIC KEY (0~9):
Change program or input number
5. RECALL:
Move to the previous viewed channel.
6. SAT:
Show the scanned satellite list.
7. MENU:
Activate main menu or exit to live channel.
8. EPG (Electronic Program Guide):
Show the TV/Radio program guide.
9. FAV:
To get favorite channel list you set before.
10. EXIT:
Exit current menu step by step.
11. CH
 /  :
Change program.
12. VOL
 /  :
Change volume in viewing mode.
13. PAGE+/-
Page up/down on menu.
14. OK:
Confirm the highlighted menu item.
Open the program list.
Figure 4. Remote Control Unit