Azdome M330 - Firmware Update

EN-31 EN-32
File named **************_*******.MP4 = Dash cam video file
11.FirmwareUpdate
1. Remove the microSD card from the dashcam.
2. Insert the card into the microSD card reader and connect it to a
computer.
3 Download the latest M330 Firmware from . www.azdomes.com
> Support > Downloads on your computer.
4. Unzip the downloaded firmware (Zip file) and copy the firmware
file named “******.bin” to the root directory of microSD card.
5. Connect the camera to the car charger to start the firmware
update process. You should see the upgrade progress bar which
means your M330 dash camera is updating the new firmware.
Please NOTE:
The firmware update may take up to about 1mins. So please be
patient. Make sure the POWER does NOT get disconnected while
the firmware is being updated. Once the firmware is updated, the
camera will turn OFF automatically.
6. You can turn on and check the latest firmware version by going
into the APP's settings > Firmware Version.