User Manual
Page 26 of 37
Protocol Select the IP protocol to block.
Click Save/Apply to take effect the settings. The new rule will then be displayed
in the Outgoing IP Filtering table list.
Click Delete button to delete a corresponding rule.
Blocking Control (Parental Control)
Parental Control allows you to apply router access restrictions among LAN devices within
specific times in a day. A maximum of 16 restriction rules can be created.
Key in the following parameters:
Day Click to select the days on which to apply the restriction.
Time Start (Blocking Time) (hh:mm) Enter the time when the restriction will be enabled
(00:00 to 23:59).
Time End (Blocking Time) (hh:mm) Enter the time when the restriction will be disabled
(00:00 to 23:59).
Application Filter
Application Filter provides control on popular applications to be allowed or denied access
to local clients. Check the box of applications that you want to allow to be accessed by
local clients and uncheck those that you want to deny.
To Next Page
Loading...
