User Manual
Page 30 of 37
UPnP
This page allows you to enable/disable UPnP feature on the modem-router.
Settings Restore
To import a previously saved configuration file from your PC and update the settings of
your router, click Browse to locate the romfile.cfg upgrade file. Then click the Restore
button.
Settings Backup
To backup the settings as a configuration file saved on your PC, click the Backup button.
Select the folder where you want to save the file and key in the file name under which
you want to save the settings. Default file name is romfile.cfg.
Restore Default
To restore your router to its factory default settings, click the Reset button. When
prompted, click OK.
To Next Page
Loading...
Need help?
General
