User Manual
Page 25 of 37
MAC Filtering
The router supports MAC Filtering, which allows you to easily set up rules to control
incoming and outgoing Internet traffic. Choose MAC from the Rule Type drop down box to
configure MAC Filtering.
Key in the following parameters:
IP Filter Rule Index Select the index of the filter rule.
Interface Select the WAN interface for filter rule.
Direction Select the direction of the filter rule.
Source IP Address/Subnet Mask Enter the IP address of the PC on the LAN to
block.
Source Port Enter the port number used by the application to block.
Destination IP Address/Subnet Mask Enter the IP address of the remote server to
which connection should be blocked.
Destination Port Enter the destination port number used by the application to
block.
To Next Page
Loading...
Need help?
General
