Q1: What is the default IP address, Username and Password to login to
the DSL8800GR(S) Web User Interface?
A1: The default IP address is 192.168.1.254 . Simply type admin as its
username and admin as its password.
Q2: How can I reset the DSL8800GR(S) to the factory default?
A2: Press and hold the Reset button at the back panel of the DSL8800GR(S)
for 10 seconds then release.
Q3: How do I upgrade the firmware of my DSL8800GR(S) router? Is it
advisable to do so?
A3: When logged in to the web-based setup page, click Device Administration>
Firmware Upgrade > Choose File. It is strongly recommended to only
update your firmware if advised by your ISP or if it has been released and
advised by Aztech to be stable.
Q4: Is it better to use the 5.0GHz wireless band compared to 2.4GHz?
A4: The internet surfing experience is likely to improve on 5.0GHz with
probably lesser wireless interference, however the 5.0GHz SSID can only
be detected if your end device supports 5.0GHz wireless interface as well.
FREQUENTLY ASKED QUESTIONS
To Next Page
Loading...
Need help?
General
