User Manual
Page 17 of 40
Step 4
To confirm if the connection was established, check the LEDs. The Power LEDs and
the Powerline Activity LEDs on both HomePlugs are ON.
Step 5
Unplug the HomePlug AV2s and then connect them to your Ethernet devices using
the Ethernet cables from the product package. After connecting the Ethernet
cable, plug the HomePlugs directly to a wall outlet.
An Ethernet-enabled device can be a router, computer, hub, gaming console, IP
phone, network printer, or IP TV set-top box.
Note: HomePlug AV2s work best when connected directly to a wall socket. It is
suggested to avoid plugging a HomePlug AV2 to a power strip or power extension
as much as possible. Other electrical devices plugged in the power strip produce
electrical noise that may affect the overall performance of the HomePlug.
To Next Page
Loading...
