Aztech WL556E

WL556E
Portable Wireless-N Repeater

Aztech WL556E Specifications

General

Wireless Standards	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Wireless Speed	Up to 300 Mbps
Security	WEP, WPA, WPA2
Antenna	2 x External Antennas
Operating Modes	Repeater
Ports	1 x 10/100Mbps Ethernet Port

Summary

About the Device

Minimum System Requirements

Lists the essential hardware and software prerequisites for using the device.

Package Contents

Details all the items included in the product packaging for user verification.

Device Overview

Front Panel

Describes the components and indicators visible on the front of the WL556E device.

Bottom Panel

Details the ports and reset button located on the base of the WL556E unit.

Tips for placing the Repeater

Configuring the Repeater

Use the Device as a Wireless Repeater

Explains how to configure and operate the WL556E to extend wireless network range.

Use the Device as a Wireless Bridge

Details the process of connecting wired devices to the wireless network via the WL556E.

Configure the WL556 E as a Wireless AP

Guides on setting up the WL556E to function as a Wireless Access Point.

Changing the Wireless Settings

Changing the Wireless Security Settings

Provides instructions on modifying the wireless network's encryption and authentication methods.

WPS

Configuring Wireless MAC Filtering

Viewing the Home Page

System Management

Accessing System Management

Outlines the procedure to access the device's administrative interface for management.

Information

Firmware

Reboot

Password

Setting a Static IP on your PC

Setting Static IP on Windows Vista

Step-by-step guide for configuring a static IP address on a Windows Vista operating system.

Setting Static IP on Windows 7

Step-by-step guide for configuring a static IP address on a Windows 7 operating system.

Safety Precautions

FCC Notice