PT-5IT SYSTEM BOARD AWARD BIOS SETUP
3
F5 : Retrieves the previous CMOS values from CMOS, only for the
current option page setup menu.
F7 : Loads the SETUP default values from BIOS default table, only
for the current option page setup menu.
F10 : Save all changes made to CMOS RAM, only for the MAIN
MENU.
The following pages will show the simulate screens of CMOS SETUP, each figure
contains the setup items and the default settings of them. Below each figure may or may
not be contained a lists of function description for commonly used settings. For the
other settings' function description you needed, please feel free to contact with your
supplier.
A. STANDARD CMOS SETUP
ROM PCI / ISA BIOS (2A59IXXX)
STANDARD CMOS SETUP
AWARD SOFTWARE, INC.
Date (mm : dd : yy) : Thu, Apr 3 1997
Time (hh : mm : ss) : 11 : 33 : 55
HARD DISKS TYPE SIZE CYLS HEAD PRECOMP LANDZ SECTOR MODE
Primary Master Auto 0 0 0 0 0 0 Auto
Primary Slave None 0 0 0 0 0 0 ------
Secondary Master Auto 0 0 0 0 0 0 Auto
Secondary Slave None 0 0 0 0 0 0 ------
Drive A : 1.44M, 3.5 in.
Drive B : None Base Memory : 640 K
Extended Memory : xxxxxx K
Video : EGA/VGA Other Memory : xxxxxx K
Halt On : All Errors Total Memory : xxxxxx K
ESC : Quit
: Select Item
PU/PD/+/- : Modify
F1 : Help (Shift)F2 : Change Color
Fig. 5-3 STANDARD CMOS SETUP screen.
MODE :
For IDE hard disks, this BIOS provides three modes to support both normal size IDE
hard disks and also disks size larger the 528MB:
NORMAL : For IDE hard disks size smaller then 528MB.
To Next Page
Loading...