AZZA PT-5IT - Power Management Setup; Pnp;Pci Configuration

PT-5IT SYSTEM BOARD AWARD BIOS SETUP
7
A. POWER MANAGEMENT SETUP
ROM PCI / ISA BIOS (2A59IXXX)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
Power Management : User Define ** Reload Global Timer Events **
PM Control by APM : Yes IRQ[3-7 , 9-15] , NMI : Enabled
Video Off Method : Blank Screen Primary IDE 0 : Disabled
Video Off After : Standby Primary IDE 1 : Disabled
Secondary IDE 0 : Disabled
Doze Mode : Disable Secondary IDE 1 : Disabled
Standby Mode : Disable Floppy Disk : Disabled
Suspend Mode : Disable Serial Port : Enabled
HDD Power Down : Disable Parallel Port : Disabled
VGA Active Monitor : Enabled
** Break Event From Suspend **
IRQ 8 Clock Event : Disabled
ESC : Quit
 : Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F7 : Load Setup Defaults
Fig. 5-6 POWER MANAGEMENT SETUP screen.
WARNING : The POWER MANAGEMENT SETUP in this screen are provided so that
technical professionals can modify the Chipset to suit their requirement.
If you are not a technical engineer, do not use this program !
Power Management :
This setting controls the Power Management functions. "User Define" allows the values
of all parameters could be modified. "Min Saving" and "Max Saving" fixed the values
of four parameters, including "Doze Mode", "Standby Mode", "Suspend Mode" and
"HDD Power Down". "Disable" disabled all Power Management functions. Default is
"User Define".
A. PNP/PCI CONFIGURATION