B.Well PRO-36 - Electromagnetic Compatibility Information; Electromagnetic Emissions Guidance

Instruction for use
18
En
PRO-36
13. ELECTROMAGNETIC COMPATIBILITY INFORMATION
Table 1
For all ME EQUIPMENT and ME SYSTEMS
Guidance and manufacturer’s declaration – еlectromagnetic emissions
The PRO-36 is intended for use in the electromagnetic environment specifi ed below.
The customer or the user of the PRO-36 should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic enviroment-guidance
RF emissions
CISPR 11
Group 1
The PRO-36 uses RF energy only for its internal function. Therefore, its RF emissions are very
low and are not likely to cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
The PRO-36 is suitable for use in all establishments, including domestic establishments and
those directly connected to the public low-voltage power supply network that supplies build-
ings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Class A
Voltage fl uctuations/
fl icker emissions
IEC 61000-3-3
Complies