23
EN
injuries in the event of a collision shall be properly secured.
• The seat cover should not be replaced with any other than the on
recommended by integral part of the restraint performance.
• Any straps holding the restraint to the vehicle should be tight; restraining
the child should be adjusted to the child’s body, and should not be twisted.
• It is extremely dangerous to use any load bearing contact points other
than those described in the instructions and marked in the child restraint.
• Be sure the distance between main loading point and support point is
more than 150mm. Please contact the child restraint manufacturer if in
doubt about this point.
To Next Page
Loading...
