EasyManua.ls Logo

Babify 10040959 - Installing for Group 1 (9-18 Kg)

Babify 10040959
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
EN
INSTALLING FOR GROUP 1 (9-18KG)
Group 1 is for children aged from 9 months old to 4 years old or children
weighing 9-18 kg. Note: Children weighing 9-12 kg need the headrest pillow
and cushion pad.
After xing the ISOFIX system, adjust the seat at the most reclined 4
position (F1).
Unhook the installation bar lock (F2), and pull out the long axis.
Push forward the seat and pull out the three points re-tractor safety belts
to the nearest seatbelt buckle , one belt through the red buckle and then
lock it, another belt through the lap belt hook for group 1 (F14-a), then
fasten the seat belt buckle (F14-b)
Make sure the safety belt is not twisted, loosened or knotted. Then return
the seat to original position, insert the long axis and secure the installation
bar lock.
Warning: This Child car seat must be used with ISOFIX and top tether at
the same time with 3-point retractor seat belts.
Loosen the shoulder straps, unlock the 5 point harness buckle.
Pull forward on the shoulder straps to the side parts to loosen the straps.
(F15)
Place your child in the car seat, then insert the two halves into the crotch
buckle.
Make sure the shoulder straps t your child by pulling the adjuster belt
(F8).
NOTE: When nished, pull the 5 point harness system to make sure the buckle
is well locked.

Table of Contents

Related product manuals