Baby Lock BL9 User Manual (English)

Other manuals for Baby Lock BL9

Questions and Answers:

J
Joseph RussellJul 30, 2025
Why is the upper thread breaking on my Baby Lock Sewing Machine?
- K
  Kara ThomasJul 31, 2025
  To prevent the upper thread from breaking on your Baby Lock Sewing Machine, begin sewing at a medium speed. Ensure the thread follows the correct path. Replace a bent or dull needle with a new one. Adjust the upper thread tension appropriately. Use a needle size suitable for the fabric. Replace the needle if its eye is worn. If the needle hole in the needle plate is damaged, repair or replace the plate.
D
Dr. Mark MendozaAug 4, 2025
How to fix skipping stitches on my Baby Lock Sewing Machine?
- D
  Dylan PerryAug 4, 2025
  Skipping stitches on your Baby Lock Sewing Machine can occur for several reasons. Ensure the needle is correctly inserted and replace it if bent or worn. Verify that the machine is threaded properly. Use the recommended needle and thread for your fabric; for stretch fabrics, try a #11 blue tip needle. If problems persist, the needle bar height, needle timing to shuttle, or clearance between the needle and hook may need mechanical adjustment.
K
Kristin GoodwinAug 9, 2025
Why is the bobbin thread breaking on my Baby Lock BL9 Sewing Machine?
- K
  Karen KeithAug 9, 2025
  If the bobbin thread is breaking on your Baby Lock Sewing Machine, make sure the bobbin case is threaded correctly. Adjust the stopper's position if there's too much thread on the bobbin. Clean any lint stuck inside the hook race. Switch to a high-quality sewing thread and clear out any jammed thread. Also, adjust the bobbin thread tension correctly.
S
Stephanie Williams DDSAug 14, 2025
What to do if fabric not moving on my Baby Lock BL9 Sewing Machine?
- L
  Lisa MorrisAug 14, 2025
  If your Baby Lock Sewing Machine's fabric isn't moving, the feed dog height may be incorrect, requiring mechanical adjustment. Ensure both needle and bobbin threads are under the foot when you start sewing. Also, the feed dog teeth might be worn, and need to be changed.
C
clintonhammondAug 19, 2025
Why is my Baby Lock BL9 Sewing Machine so noisy?
- S
  Sean KennedyAug 19, 2025
  Noisy operation of your Baby Lock Sewing Machine can be due to several factors. The backlash between the shuttle hook gear and lower shaft gear might be too great, or the lower or upper shaft gear could be loose. The belt tension might be inappropriate, or there might not be enough oil. Oiling all moving parts could help.
K
katie84Aug 25, 2025
Why is there deformation of pattern on my Baby Lock BL9?
- E
  Erin BanksAug 25, 2025
  Deformation of the pattern on your Baby Lock Sewing Machine can occur due to inappropriate zigzag synchronization, disengagement of the cam follower, upper thread tension being too strong, or inappropriate feed balance. Adjusting the upper thread tension correctly might help.