Bacharach INJECTOR CALIBRATOR CD3 - Cabinet, Front & Left Side View

Instructions 67-9319 Bacharach, Inc. Page 5-5
INJECTOR CALIBRATOR CD3 PARTS LISTS AND DIAGRAMS
5.3 Cabinet, Front & Left Side View
Item* Description Part #
________________________________________________________________
66 pneumatic control assembly, complete 67-6460
pneumatic control parts:
solenoid valve, 3-way, NC 120VA 03-4232
filter/regulator with gage 07-1576
switch, pressure, Sigmanetic 104-0587
91 cooling coil 67-6412
108 thermostat 67-6170
110 temperature sensor (350°C max) 67-6141
116 tank heater (500W) 67-5426
199 motor:
3 hp, 220/380/440 VAC, 3 phase, 50 Hz 04-4098
5 hp, 220 VAC, 3 phase, 50 Hz 04-4117
5 hp, 380 VAC, 3 phase, 50 Hz 04-4116
5 hp, 440 VAC, 3 phase, 50 Hz 04-4118
200 motor:
3 hp, 230/460 VAC, 3 phase, 60 Hz 04-4097
5 hp, 230/460 VAC, 3 phase, 60 Hz 04-4114
201 motor:
3 hp, 208 VAC, 3 phase, 60 Hz 04-4096
5 hp, 208 VAC, 3 phase, 60 Hz 04-4115
202 motor, 1/3 hp, 110/220 VAC, 50 Hz 04-3995
203 motor, 1/3 hp, 230 VAC, 60 Hz 04-3993
239 valve, skinner, solenoid 03-4222
243 relief valve, RPEC-JEN-FEA 03-4180
______________________________________________________________
*(based on drawing 67-7622S6R86 & S7R86)