PIN DEFINITIONS
Each pin on the plug-and-play socket has a defined purpose and is labeled on the socket under the (DC) Jumper PC
Board. Each pin is also connected to a solder pad for use with systems that do not support plug-and-play functionality
(Figure 20). The table on the following page provides the purpose for each pin. The J2 row of pins has a blank key
on either end to help ensure that a plug-and-play device cannot be incorrectly inserted. See the following chart for
pin locations.
20
Shown with (DC) Jumper PC Board removed.
Shown with (DC) Jumper PC Board in place.
To Next Page
Loading...
