ASSEMBLE BOTTOM PLATE
Place (1) structured panel [ B ] on the
work surface with the angled sides up.
Make sure the work surface is smooth
and soft so it doesn't scratch the panel.
Align the bottom plate [ D ] to the
structured panel tabs. Note the notched
corner of the bottom plate will fit
around the angled side of the structured
panel.
Assemble using (2) 15MM bolts [ P ] and
(2) hexnuts [ Q ]. Hand tighten only.
FIRE COLUMN ASSEMBLY INSTRUCTIONS 1-8
PAGE 4
M6 x 15MM BOLT
P
M6 HEXNUT
Q
x 2 x 2
P
P
B
D
1
STEP
NOTCHED
CORNER
D
TAB
DO NOT RETURN PRODUCT TO THE
STORE. IF YOU HAVE QUESTIONS
OR HAVE TROUBLE WITH
ASSEMBLY, PLEASE EMAIL
CUSTOMER SERVICE AT:
customerservice@landmann-usa.com
To Next Page