PAGE 3
When unpacking the Fire Column from the carton, make sure you find and become familiar with all the parts
listed below. Use caution as some parts may have sharp edges.
PARTS LIST
(1) BASE WITH ASH CATCHER
A
(1) BOTTOM PLATE
D
(2) STRUCTURED PANEL
B
(2) SLIDING PANEL
C
(4) M5 x 15MM
SHOULDER BOLT
M
(4) M5 WINGNUT
N
(8) M6 x 15MM
BOLT
P
(4) M6 HEXNUT
Q
(4) 18MM FLAT
WASHER
R
x 4 x 4 x 8 x 4 x 4
x 2 x 2
HARDWARE LIST
Assembly time: 20 minutes
A Phillips or plain screwdriver and
an adjustable wrench are needed
for assembly.
TOOLS REQUIRED
FIRE COLUMN
To Next Page