Outdoor LP Gas Barbecue Grill Model No. GBT1321WRS / BY13-101-001-06
1
DO NOT RETURN PRODUCT TO STORE.
For assistance, call 1.800.762.1142 toll free. Please have
your owner’s manual and model number available for
reference.
Note: The model number can be found on the back or side of the grill.
For Easiest Assembly:
• To avoid losing any small components or hardware, assemble
your product on a level surface that does not have cracks or
openings.
• Clear an area large enough to lay out all components and
hardware and that is soft to not scratch or damage any
surface finishes.
• When applicable, tighten all hardware connections by hand
first. Once the step is completed go back and fully tighten all
hardware while being cautious not to over tighten to avoid
damaging surfaces or stripping hardware.
• Follow all steps in order to properly assemble your product.
To complete assembly you will need:
• (1) Leak Detection Solution (Instructions on how to make
solution are included in “Operating Instructions” section)
• (1) 14.1 oz or (1) 16.4 oz LP gas tank.
Typical assembly: approximately 30 minutes.
Assembly Instructions
3
Attach Heat Plate Supports and Lock
B
x 2
D
x 4
H
x 2
J
x 4
L
x 4
O
x 4
2
Attach Brand Plate, Lid Handle, Top Hinges and
Temperature Gauge
A
x 2
C
x 2
G
x 2
I
x 2
J
x 2
K
x 2
L
x 2
M
x 4
N
x 2
O
x 2
4
Fold Legs
To Next Page
Loading...
Need help?
General