Badger Meter ER-420-AC - Page 20

Models ER-420-AC, ER-420-DC & ER-420-LP
9 – OTHERS
MODEL 91 For support and maintenance, it is important to have information about the characteristics of the
ER-420. The main platform of this product is the F100-series with a pulse input signal type P.
Your supplier will ask for this information in the case of a serious breakdown or to assess the
suitability of your model for upgrade considerations.
TYPE 92 For support and maintenance, it is important to have information about the characteristics of the
ER-420. This window displays the product specific information: ER-420-LP, ER-420-DC or ER-420-
AC.
Your supplier will ask for this information in the case of a serious breakdown or to assess the
suitability of your model for upgrade considerations.
VERSION SOFTWARE 93 For support and maintenance it is important to have information about the characteristics of the
ER-420.
Your supplier will ask for this information in the case of a serious breakdown or to assess the
suitability of your model for upgrade considerations.
SERIAL NUMBER 94
PASS CODE 95 All SETUP values can be passcode-protected. This protection is disabled with value 0000 (zero).
Up to and including 4 digits can be programmed, for example 1234.
TAGNUMBER 96 For identification of the unit and communication purposes, a unique tag number of maximum 7
digits can be entered.
Page 20 March 2013