To Next PageTo Next Page
Need help?Do you have a question about the BAFANG DP C171.CAN and is the answer not in the manual?
General| Brand | BAFANG |
|---|---|
| Model | DP C171.CAN |
| Category | Measuring Instruments |
| Language | English |
Technical specifications including rated voltage, operating temperature, storage temperature, waterproof rating, and bearing humidity.
Overview of the display's functions like speed display, battery indicator, walk assistance, and Bluetooth connectivity.
Instructions for turning the e-bike display system on and off, including automatic shutdown features.
How to switch between different pedal assist levels (1-5) using the control buttons.
How to cycle through different display modes like TRIP, TOTAL, MAXS, AVG, RANGE, and Output Power.
Guide on how to activate and deactivate the display's headlight and backlight, and adjust brightness.
Procedure for activating and using the walk assistance function for pushing the bike.
Explanation of how the battery level is displayed using bars and what blinking means.
Information about the USB charging port, its voltage, and current limitations.
Details on connecting the display to a mobile phone via Bluetooth for app integration and firmware updates.
How to reset the daily kilometers, maximum speed, and average speed values on the display.
Instructions for changing the display units between kilometers and miles.
Guide on adjusting the light sensitivity for the display's automatic backlight feature.
Steps to adjust the brightness level of the display screen from 1 to 5.
How to configure the automatic shutdown time for the display to save power.
Enabling or disabling notifications for service reminders, such as mileage-based alerts.
Viewing the configured wheel size setting for accurate speed and distance calculations.
Checking the current speed limit setting on the display.
Accessing and viewing hardware information about the motor controller.
Accessing and viewing software version information for the motor controller.
Viewing hardware identification details for the display unit.
Checking the software version of the display unit.
Accessing hardware information related to the Battery Management System (BMS).
Checking the software version of the Battery Management System (BMS).
Viewing hardware identification details for the motor sensor.
Checking the software version of the motor sensor.
Detailed information about the battery, including voltage, capacity, SOC, and charging cycles.
Viewing recent error codes displayed on the system, including the meaning of 'Error code 00'.
Troubleshooting steps for throttle faults, including checking connections and replacement.
Procedure to address throttle position errors, involving checking adjustment and potential replacement.
Steps for resolving overvoltage protection errors, such as battery removal and re-insertion.
Guidance for troubleshooting hall sensor signal errors within the motor.
Instructions for addressing errors related to the engine phases.
Steps to resolve engine overheating issues by cooling down the system.
Troubleshooting a faulty temperature sensor within the motor.
Steps to diagnose and fix errors related to the controller's current sensor.
Troubleshooting errors caused by a faulty temperature sensor in the battery.
Resolving controller over-temperature protection errors by cooling the system.
Troubleshooting a faulty temperature sensor located within the controller.
Steps to fix speed sensor errors, including alignment, connection checks, and replacement.
Troubleshooting steps for errors related to the torque signal, focusing on connection checks.
Diagnosing and resolving errors with the speed signal from the torque sensor.
Guidance for addressing overcurrent issues originating from the controller.
Troubleshooting communication errors by checking all system connections.
Steps to resolve brake signal errors, including checking connections and potential faults.
Troubleshooting 15V detection circuit errors by contacting the retailer.
Steps to resolve errors detected in the keypad's circuit.
Troubleshooting a faulty Watchdog Timer (WDT) circuit.
Guidance for addressing battery overvoltage errors.
Steps to resolve battery undervoltage errors.
Troubleshooting errors related to excessive power from battery cells.
Resolving errors caused by a single battery cell having too high voltage.
Steps to address battery overheating issues.
Troubleshooting errors related to the battery being too cold.
Guidance for resolving issues where the battery's State of Charge (SOC) is too high.
Steps to resolve errors when the battery's State of Charge (SOC) is too low.
Troubleshooting defects in the switching detection mechanism.
Steps to resolve issues where the electronic derailleur fails to release.
Troubleshooting problems with a jammed electronic lock.
Steps to diagnose and fix errors related to the Bluetooth module.
