10
BF-UM-C-DP C260-EN November 2019
7.7.2.1 View “Wheel Size”
Briefly press
or to select ” Wheel
Size”, and then briefly press “Mode” to view
the wheel size default, then briefly press
“Mode” to exit back to the "Information"
interface.
7.7.2.2 View “Speed Limit”
Briefly press
or to select ” Speed Lim-
it”, and then briefly press “Mode” to view
the speed limit default, then briefly press
“Mode” to exit back to the "Information"
interface.
7.7.2.3 View “Battery Info.”
Briefly press
or to go to “Battery
Info.”, and then briefly press “Mode” to
enter, then briefly press “+” or “-” to view
the battery data (b01 → b04 → b06 → b07 →
b08 → b09 → b10 → b11 → b12 → b13 → d00
→ d01 → d02 → … → dn → Hardware Ver →
Software Ver), then briefly press “Mode” to
exit back to the "Information" interface.
Notice: If the the battery doesn't have
communication function, you won’t see any
data from battery.
Code Code Definition Unit
b01 Current temperature
℃
b04 Total voltage mV
b06 Average current mA
b07 Remaining capacity mAh
b08
Battery capacity of
Full charged
mAh
b09
Relative Charge in
percentage
%
b10
Absolute Charge in
percentage
%
b11 Cycle Times times
b12 Max Uncharge Time Hour
b13 Last Uncharge Time Hour
d00 The number of cell
d01 Voltage Cell 1 mV
d02 Voltage Cell 2 mV
dn Voltage Cell n mV
Hardware Ver Hardware Version
Software Ver Software Version
NOTE: If no data is detected, it displays“--”.
To Next Page
Loading...
Need help?
General
