BAFANG DP C260.CAN - Page 11

11
BF-UM-C-DP C260-EN November 2019
USER MANUAL FOR DISPLAY
7.7.2.4 View “Display Info”
Briefly press
or to select ”Display
Info”, and then briefly press “Mode” to view
it, briefly press or to view“Hardware
Ver” or “Software Ver”, then briefly press
“Mode” to exit back to the "Information"
interface.
7.7.2.5 View “Ctrl Info”
Briefly press
or to select ”Ctrl Info”,
and then briefly press “Mode” to view it,
briefly press or to view“Hardware Ver”
or “Software Ver”, then briefly press “Mode”
to exit back to the "Information" interface.
7.7.2.6 View “Torque Info”
Briefly press
or to select ”Torque
Info”, and then briefly press “Mode” to view
it, briefly press or to view“Hardware
Ver” or “Software Ver”, then briefly press
“Mode” to exit back to the "Information"
interface.
NOTE: If your Pedelec has no torque sensor,
then “Torque Info”can not be displayed.
7.7.2.7 View “Error Code”
Briefly press
or to select ”Error Code”,
and then briefly press “Mode” to view it,
briefly press or to view message of
error for last ten times by “E-Code0” to
“E-Code9”, then briefly press “Mode” to exit
back to the "Information" interface.
NOTE: 00 means no error exist.