9
BF-UM-C-DP C260-EN November 2019
USER MANUAL FOR DISPLAY
and then briefly press “Mode” to enter into
the item. Select the percentage as “100%”/
“75%”/“50%”/“30%”/“10%”, then briefly
press “Mode” to save and exit back to the
"Setting" interface.
Notice: “10%” is the lowest brightness and
100%” is the highest brightness.
7.7.1.4 “Auto Off”--- set automatic Off
time
Briefly press
or to select “Auto Off”,
and then briefly press “Mode” to enter into
the item. Select the automatic Off time as
“OFF”/“9”/“8”/“7”/“6”/“5”/“4”/“3”/“2”/“1”,
briefly press “Mode” to save the setting and
exit back to the "Setting" interface.
Notice: “OFF” means this function is off, the
unit is minute.
7.7.1.5 “Assist Mode”---set assistance level
Briefly press
or to select “Assist
Mode”, and then briefly press “Mode” to en-
ter into the item. Select the assistance level
as “3”/“5”/“9”, then briefly press “Mode” to
save and exit back to the "Setting" interface.
7.7.1.6 “Service”--- turn on/off the Service
indication
Briefly press
or to select “Service”,
and then briefly press “Mode” to enter into
the item. Select “NO”/“YES” (“YES” means
Service indication is on; “NO” means Service
indication is off), then briefly press “Mode”
to save and exit back to the "Setting"
interface.
7.7.2 “Information” interface
In SETTING interface, briefly press (<0.5S)
or to select “Information” and then briefly
press (<0.5S) “Mode” to confirm and enter into
“Information”.
The operations in “Information” item
To Next Page
Loading...
Need help?
General
