Bailey DISCOVERY - Troubleshooting

109
REFRIGERATORS
1. Turn the rotary selector switch (1) to the
flame position.
2. Turn the temperature selector (2) clockwise,
push in and hold. Keep the controller button
depressed.
3. Igniter : Press button (3) of battery igniter
down and keep it depressed. The ignition
process is activated automatically.
4. Once the flame ignites, the pointer of
galvanometer (4) begins moving into the green
range. The refrigerator is operational. Keep
knob (2) depressed for approx. 15 seconds and
finally release it.
SETTING OF COOLING COMPARTMENT
TEMPERATURE
Select the desired cooling compartment
temperature by turning the rotary knob (2).
The scale starts with MIN position (small bar
= highest temperature) and climbs up to MAX
position (large bar = lowest temperature).
• Please select the medium setting (A) for
ambient temperatures between +15°C
and+25°C. The unit operates within its
optimum performance range.
• 12v operation: The refrigerator operates
without thermostatic control (continuous
operation).
Each refrigerator with manual ignition is
equipped with an automatic flame safety valve
which interrupts the gas supply after approx.
30 seconds when the flame has extinguished.
The refrigerator must be operated using
liquefied gas (propane or butane NOT natural
gas or town gas). When using LPG please
consider that the burner needs cleaning at
shorter intervals due to the gas combustion
method (annually).
For physical reasons, ignition faults could
occur starting from an altitude above sea
level of approx. 1,000m/3,280 ft. (This is not a
malfunction).
On the initial refrigerator start-up or after a
cylinder change, air may be trapped in the gas
line. To purge the air from the line, switch on
the refrigerator and any other gas appliances
(e.g. stove) for a short time. The gas ignites
without delay.
LIGHTING
The interior lighting is controlled using a door
contact.
Please contact the authorized Dometic Service
if a failure occurs.
USING THE DOOR LOCK WHEN PARKING THE
V
EHICLE NOT APPLICABLE TO 9330
If the vehicle is parked for a longer period of
time, the locking hook can be clamped by
means of a locking bar.
The door can be opened by pulling it.