16
VALVE INSPECTION
REFER TO MAINTENANCE SCHEDULE IN THIS OWNER’S MANUAL FOR VALVE
ADJUSTMENT INSPECTION INTERVALS.
Valve clearance should be:
Intake: 0.002 inch (0.05 mm)
Exhaust: 0.003 inch (0.0762 mm)
Excessive clearance will cause noise. Insufcient clearance will cause loss of
power and possibly damage the valves.
For those who are mechanically procient and have the proper tools, instructions
on adjusting the valve clearance are given in the service manual. If assistance is
needed please contact Baja Inc. to nd your local service center.
To Next Page
Loading...