Baja Shifter 90 - Stopping the Engine; Running-In of New Engine

Baja Shifter 90 Model SF90 (double-seat): Owner’s Manual Version:1.0 April 2005
38
3) Release the button and cut the power of the starting motor immediately after starting the engine.
4) Don’t press the starting button after starting the engine. Otherwise it may cause damages to the engine.
5) Don’t press the starting button for more than 3-4 seconds for one time; wait for about 10 seconds to
repress, and press the button with the throttle slightly opened;
6) In cold weather, warm up the engine for several minutes at the idle speed; then speed up once the
operation temperature has reached the requirements specified;
In hot weather, avoid running the engine at the idle speed for a long time; otherwise, it may overheat
the engine.
I. Stopping the Engine
1) Run the engine for about 3-5 minutes at the idle speed to cool down;
2) Turn off the throttle;
3) Turn off the ignition switch.
J. Running-in of New Engine
The running-in distance is 1000km. During this period, please follow the instructions below:
1) Run the engine according to the requirements specified;