EasyManua.ls Logo

Bajaj CT 110 - Control Switches; Left Handlebar Controls; Right Handlebar Controls

Bajaj CT 110
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Control Switch LH & RH
8
A
B
Control Switch LH
A. Hi/Low beam switch
C. Turn Signal Switch : When the turn
signal switch is turned to Left ( ) or
Right ( ), the corresponding turn signals
flash on and off. To stop flashing, turn the
knob to center position.
D. Horn Button : ( ) Press horn button for
sounding horn.
Control Switch RH
E. Starter Button (for Electric Start) : It
operates the electric starter when clutch
lever is depressed with transmission in
any gear. It is recommended to start
engine with transmission in neutral.
B. Pass Switch : ( )Press the switch to
flash the head light. It is used to give
signal to vehicles coming from opposite
side while overtaking.
While engine running, Headlamp High
beam filament gets ON
While engine running, Headlamp Low
beam filament gets ON
C
D
E
Control Switch LH Control Switch LH Control Switch RH-CT 100 ES